Wed, 21 Jun 2023 09:22:02 +0000 https://abitanadirect.com/ The amplifier has a direct line level audio input on a 3,5mm stereo jack on the connector side of the module, and an override stereo jack input on the other side of the module. Loudspeaker outputs are on industrial grade pluggable connectors.
The gain and mute of the amplifier can be controlled either by an external volume control potentiometer (ABI-MM1005Sxx or ABI-MM1045Sxx) or by a 0-10V automation control signal from any of the popular brands / standards.

Required power supply:  ABI-PS4014S45 (desktop version) or ABI-PS3514S45 (DIN rail version

Compatible with 0-10V control systems of
KNX, Domintell, Luxom, Velleman, Niko HC, SmartHouse, Control4, Q-Bus, MyHome and many more.

Characteristics:
- Line level audio input on front face & rear face 3,5mm stereo  jacks
- Speaker outputs on industrial grade pluggable screw terminal connectors
- Output power: max 2x20W RMS into 4 Ohm loads
- Max. Gain of main amplifier: approx 29,5dB
- Gain of preamplifier: x2 (6dB)
- Power supply voltage: 14VDC max.
- THD+N @ 5W, 1kHz: 0,04%
- Freq range (-3dB): 20Hz to 22kHz
- SNR approx. 90dB
- Crosstalk > 68dB (20Hz to 22kHz)
- Efficiency approx 90%
- Switching frequency (spread spectrum) :300kHz+-6kHz

Standards compliance:
EMI: EN55022B

Dimensions:WxHxD (mm): 71x37x80 (D=110 with potentionmeter and connectors)
Net weight (kg/unit) :    0,21kg
Gross weight (kg/unit):  0,26kg
Packaging:  Individually packaged]]> Tue, 05 Jul 2022 17:19:39 +0000
Characteristics:
-RJ45 plug to RJ11 plug
- Frequency range 0 - 250 MHz

Standards compliance:
- ISO/IEC 60603-7
- ISO/IEC 11801
- ISO/IEC 15018

Dimensions:L(m): 1,0
Net weight (kg/unit) :    0,109kg
Gross weight (kg/unit):  0,111kg
Packaging:  Individually packaged]]> Mon, 22 Mar 2021 17:15:49 +0000
Characteristics:
-RJ45 plug to RJ11 plug
- Frequency range 0 - 250 MHz

Standards compliance:
- ISO/IEC 60603-7
- ISO/IEC 11801
- ISO/IEC 15018

Dimensions:L(m): 2,0
Net weight (kg/unit) :    0,109kg
Gross weight (kg/unit):  0,111kg
Packaging:  Individually packaged]]> Mon, 22 Mar 2021 17:13:36 +0000 - CableTV signals with or without in-band return path for interactive services (DVB-C)
or
- aerial-based television and radio channels (FM, analog VHF-UHF, DVB-T)

Input coax port:
The amplifier’s input accepts broadband FM and TV signals in the range between 88 and 1.006MHz. The port also carries return path signals in the reverse direction in a band between 5MHz and 65MHz for use on Docsis compliant CableTV networks.

Output RJ45 ports:
The combination FM/VHF/UHF (extended to 1.006MHz) is offered on 24 RJ45 connectors that can be connected via shielded Cat6A, Cat7, Cat7A, Cat8 or OmniMedia cable to RJ45 wall outlets. All RJ45 ports carry back in-band return path signals for interactive digital TV services.

The front panel also sports an F-type test connector that replicates the amplifier's input signal (-1,5dB compared to the RJ45 output ports' level)
 
The amplifier can be mounted vertically, or laid flat on a shelf. This enables the use inside residential and industrial enclosures, mounted on a wall,  inside a 19" rack or placed on a tabletop or shelf.
The sturdy metal housing provides exceptional thermal conduction, effectively cooling the electronics, and protection from Electromagnetic interference and Electrostatic Discharge.

The amplifier has a built-in 230VAC  mains power supply.

Characteristics:
- 1 F coax input:  DS Aerial or CableTV and US return path
- 1F coax test port: DS Aerial or CableTV and US return path
- RJ45 output ports:      88-1006MHz downstream, gain +5,5 to +21,5dB, slope 0 to 18dB attenuation
                                   max output 101dBµV, 83,5dBµV@CTB
                                   5-65MHz upstream return path, gain -5,5 to +10,5dB, slope 0 to 6dB attenuation

- Max. Link length on OmniMedia HD1000 cable:
      Full TV band:           DVB-C <=40m, DVB-T <=60m
      Single TV channel:  DVB-C <=75m, DVB-T<=90m

- internal 230VAC mains power supply

Standards compliance:
- Safety: EN60065
- EMI: EN50081-1 & EN50082-1
- Immunity test voltage    contact discharge 4kV, air discharge 8kV
- RoHS compliance: 2002/95/EC
- WEEE compliance: 2002/96/EC

Dimensions:
Gross weight (kg/unit):  2,2kg
Packaging:  per unit]]> Fri, 08 Jan 2021 15:03:51 +0000 12VDC-1,2A power supply with 1 outputs on an 80cm long power leads with a LV3 connector.
The mains power lead is approx. 1,5m long and fitted with a Europlug CEE 7-16.
The unit which has a LED indicator for power on,  is one DIN position wide (18mm) and fits on 35mm DIN rails.

Recommended for :
ABI-EL4116S00

Characteristics:
- Switchmode power supply
- Protection: Short circuit, Overload, Over voltage
- Input 85-264 Vac, 50/60Hz
- Output 12VDC, max 1200mA
- Low standby consumption: <0,3W
- Long Life MTBF: 1,1M hours
- Output by 1 flyleads with an LV3 connector
- Supplied with Europlug CEE 7-16 mains lead, 1,5m long
- 1 DIN position wide (18mm)
- LED power-on indicator

Standards compliance:
- UL, CSA, CE, TüV approved
- EN61558-2-16, IEC62368-1
- EN55032 class B,
- EN61000-3-2,3; EN61000-4-2,3,4,5,6,8,11;
- EN61204-3

Dimensions:WxHxD (mm):18x90x54,5
Net weight (kg/unit) :    0,21kg
Gross weight (kg/unit):  0,25kg
Packaging:  Individually packaged]]> Mon, 21 Sep 2020 11:34:24 +0000 There is no more need for a bulky junction box.
The small size of the Cable Repair Splice allows mounting inside a wallbox.
The splicing of the cables is done without tools.
The IDC contacts accept wire sizes from AWG26 to AWG22 for solid conductors (installation cable) and AWG 26 to AWG 22 for stranded  conductors (patchcables).
This is compatible with all U/UTP, U/FTP, F/UTP, F/FTP, F/STP, Cat5e, Cat6, Cat6A and OmniMedia twisted pair network cables.

Characteristics:
Zamac fully shielded housing
IDC contacts
Toolless installation
Suitable for solid and stranded conductor wires
Cable jacket is retained by screw-on cable glands

Standards compliance:
ISO/IEC 11801  Class EA (10Gb/s)
OmniMedia HD1000 MHz
PoE and PoE+ according to IEEE802.3af/at
AWG 26 to AWG22 (flexible conductors)
AWG26 to AWG22 (solid conductors)
Max cable jacket diameter: 8mm

Dimensions:WxHxD (mm): 75x15x15
Gross weight (kg/unit):  0,034kg
Packaging:  Individually packaged]]> Thu, 23 Jul 2020 09:36:56 +0000 There is no more need for a bulky junction box.
The small size of the Cable Repair Splice allows mounting inside a wallbox.
The splicing of the cables is done without tools.
The IDC contacts accept wire sizes from AWG26 to AWG22 for solid conductors (installation cable) and AWG 26 to AWG 22 for stranded  conductors (patchcables).
This is compatible with all U/UTP, U/FTP, F/UTP, F/FTP, F/STP, Cat5e, Cat6, Cat6A and OmniMedia twisted pair network cables.

Characteristics:
Zamac fully shielded housing
IDC contacts
Toolless installation
Suitable for solid and stranded conductor wires
Cable jacket is retained by screw-on cable glands
Bulkhead flange with mounting screw holes

Standards compliance:
ISO/IEC 11801  Class EA (10Gb/s)
OmniMedia HD1000 MHz
PoE and PoE+ according to IEEE802.3af/at
AWG 26 to AWG22 (flexible conductors)
AWG26 to AWG22 (solid conductors)
Max cable jacket diameter: 8mm

Dimensions:WxHxD (mm): 75x15x15 flange 28x16
Gross weight (kg/unit):  0,037kg
Packaging:  Individually packaged]]> Thu, 23 Jul 2020 09:18:29 +0000 There is no more need for a bulky junction box.
The small size of the Cable Repair Splice allows mounting inside a wallbox.
The splicing of the cables is done without tools.
The IDC contacts accept wire sizes from AWG26 to AWG22 for solid conductors (installation cable) and AWG 26 to AWG 22 for stranded  conductors (patchcables).
This is compatible with all U/UTP, U/FTP, F/UTP, F/FTP, F/STP, Cat5e, Cat6, Cat6A and OmniMedia twisted pair network cables.

Characteristics:
Zamac fully shielded housing
IDC contacts
Toolless installation
Suitable for solid and stranded conductor wires
Cable jacket is retained by ratchet-closing mechanism
Bulkhead flange with mounting screw holes

Standards compliance:
ISO/IEC 11801  Class EA (10Gb/s)
OmniMedia HD1000 MHz
PoE and PoE+ according to IEEE802.3af/at
AWG 26 to AWG22 (flexible conductors)
AWG26 to AWG22 (solid conductors)
Max cable jacket diameter: 8mm

Dimensions:WxHxD (mm): 60x16x12 flange 16x28
Gross weight (kg/unit):  0,029kg
Packaging:  Individually packaged]]> Wed, 22 Jul 2020 15:45:02 +0000
The very short body allows use where other products fail: mounting inside a wallbox, behind a shallow flatscreen TV, behind ian n-wall wifi acces point, etc.

The termination of the cables is done without specific tools, only a pair of small cutting pliers to shorten the wires is required.  The cable jacket is retained by a pair of hinged self-closing parts with a ratchet mechanism.
.
The IDC contacts accept wire sizes from AWG26 to AWG22 for solid conductors (installation cable) and AWG 26 to AWG 22 for stranded  conductors (patchcables).
This is compatible with all U/UTP, U/FTP, F/UTP, F/FTP, F/STP, Cat5e, Cat6, Cat6A and OmniMedia twisted pair network cables.

Characteristics:
Zamac fully shielded housing
IDC contacts
Toolless installation
Suitable for solid and stranded conductor wires
Cable jacket is retained by ratchet-closing mechanism

Standards compliance:
ISO/IEC 11801  Class EA (10Gb/s)
OmniMedia HD1000 MHz
PoE and PoE+ according to IEEE802.3af/at
AWG 26 to AWG22 (flexible conductors)
AWG26 to AWG22 (solid conductors)
Max cable jacket diameter: 8mm

Dimensions:WxHxD (mm): 43x15x12
Gross weight (kg/unit):  0,015kg
Packaging:  Individually packaged]]> Wed, 22 Jul 2020 13:24:45 +0000 18VDC - 1A power supply with 2 outputs on individual  80cm long power leads with  LV3 (2,1/5,6) connectors.
The mains power lead is approx. 1,5m long and fitted with a Europlug CEE 7-16.
The unit is 1 DIN position wide (18mm) and fits on 35mm DIN rails.

Recommended for :
ABI-EV4003SCA (max. 2pcs)
ABI-EV4003SST (max. 2pcs)

Characteristics:
- Switchmode power supply
- Protection: Short circuit, Overload, Over voltage
- Input 85-264 Vac, 50/60Hz
- Output 18Vdc, max 1000mA
- Low standby consumption: <0,3W
- Long Life MTBF: 1,1M hours
- Output by 2   80cm-long flyleads with LV3 (2,1/5,6) connectors
- Supplied with Europlug CEE 7-16 mains lead, 1,5m long
- 1 DIN position wide (18mm)
- LED power-on indicator

Standards compliance:
- UL, CSA, CE, TüV approved
- EN61558-2-16, IEC62368-1
- EN55032 class B,
- EN61000-3-2,3; EN61000-4-2,3,4,5,6,8,11;
- EN61204-3

Dimensions:WxHxD (mm):18x90x54,5
Net weight (kg/unit) :    0,22kg
Gross weight (kg/unit):  0,25kg
Packaging:  Individually packaged]]> Mon, 06 Jul 2020 10:50:27 +0000 12VDC - 4,5A power supply with 4 outputs on individual  80cm long power leads with  LV3 (2,1/5,6) connectors.
The mains power lead is approx. 1,5m long and fitted with a Europlug CEE 7-16.
The unit is 3 DIN positions wide (53mm) and fits on 35mm DIN rails.

Recommended for :
ABI-EL4116S00 (max 4pcs)

Also available with 4x LV1 green low voltage connector, compatible with Lexcom Home, Schneider Freedomnet, and other modules.  Please specify this option when ordering.

Characteristics:
- Switchmode power supply
- Protection: Short circuit, Overload, Over voltage
- Input 85-264 Vac, 50/60Hz
- Output 12Vdc, max 4500mA
- Low standby consumption: <0,3W
- Long Life MTBF: 1,1M hours
- Output by 4   80cm-long flyleads with LV3 (2,1/5,6) connectors
- Supplied with Europlug CEE 7-16 mains lead, 1,5m long
- 3 DIN positions wide (53mm)
- LED power-on indicator

Standards compliance:
- UL, CSA, CE, TüV approved
- EN61558-2-16, IEC62368-1
- EN55032 class B,
- EN61000-3-2,3; EN61000-4-2,3,4,5,6,8,11;
- EN61204-3

Dimensions:WxHxD (mm):53x90x54,5
Net weight (kg/unit) :    0,38kg
Gross weight (kg/unit):  0,4kg
Packaging:  Individually packaged]]> Mon, 06 Jul 2020 10:50:27 +0000 14VDC - 4,5A power supply with 2 outputs on individual  80cm long power leads with  LV3 (2,1/5,6) connectors.
The mains power lead is approx. 1,5m long and fitted with a Europlug CEE 7-16.
The unit is 3 DIN positions wide (53mm) and fits on 35mm DIN rails.

Recommended for :
ABI-MM4001S40

Characteristics:
- Switchmode power supply
- Protection: Short circuit, Overload, Over voltage
- Input 85-264 Vac, 50/60Hz
- Output 14Vdc, max 4500mA
- Low standby consumption: <0,3W
- Long Life MTBF: 1,1M hours
- Output by 2   80cm-long flyleads with LV3 (2,1/5,6) connectors
- Supplied with Europlug CEE 7-16 mains lead, 1,5m long
- 3 DIN positions wide (53mm)
- LED power-on indicator

Standards compliance:
- UL, CSA, CE, TüV approved
- EN61558-2-16, IEC62368-1
- EN55032 class B,
- EN61000-3-2,3; EN61000-4-2,3,4,5,6,8,11;
- EN61204-3

Dimensions:WxHxD (mm):53x90x54,5
Net weight (kg/unit) :    0,38kg
Gross weight (kg/unit):  0,4kg
Packaging:  Individually packaged]]> Mon, 06 Jul 2020 10:50:26 +0000 5VDC-6,5A power supply with 4 outputs on individual 80cm long power leads with a green LV1 connector.
The mains power lead is approx. 1,5m long and fitted with a Europlug CEE 7-16.
The unit which has a LED indicator for power on,  is three DIN position wide (53mm) and fits on 35mm DIN rails.

Recommended for :
ABI-AV1002STR
ABI-EA1003S00
ABI-EL1001S00
ABI-EL2002S00
ABI-EL3008S00
ABI-EV1001S00
ABI-EV1002S00
ABI-EV1012S00
ABI-EV1017S00
ABI-EV2000S00
ABI-EV2008S00
ABI-EV2012S00

Characteristics:
- Switchmode power supply
- Protection: Short circuit, Overload, Over voltage
- Input 85-264 Vac, 50/60Hz
- Output 5Vdc, max 6500mA
- Low standby consumption: <0,3W
- Long Life MTBF: 1,1M hours
- Output by 4   80cm-long flyleads with green LV1 connectors
- Supplied with Europlug CEE 7-16 mains lead, 1,5m long
- 3 DIN positions wide (53mm)
- LED power-on indicator

Standards compliance:
- UL, CSA, CE, TüV approved
- EN61558-2-16, IEC62368-1
- EN55032 class B,
- EN61000-3-2,3; EN61000-4-2,3,4,5,6,8,11;
- EN61204-3

Dimensions:WxHxD (mm):53x90x54,5
Net weight (kg/unit) :    0,38kg
Gross weight (kg/unit):  0,4kg
Packaging:  Individually packaged]]> Mon, 06 Jul 2020 10:50:26 +0000 5VDC-2,4A power supply with 2 outputs on individual 80cm long power leads with a green LV1 connector.
The mains power lead is approx. 1,5m long and fitted with a Europlug CEE 7-16.
The unit which has a LED indicator for power on,  is one DIN position wide (18mm) and fits on 35mm DIN rails.

Recommended for :
ABI-AV1002STR
ABI-EA1003S00
ABI-EL1001S00
ABI-EL2002S00
ABI-EL3008S00
ABI-EV1001S00
ABI-EV1002S00
ABI-EV1012S00
ABI-EV1017S00
ABI-EV2000S00
ABI-EV2008S00
ABI-EV2012S00

Characteristics:
- Switchmode power supply
- Protection: Short circuit, Overload, Over voltage
- Input 85-264 Vac, 50/60Hz
- Output 5VDC, max 2400mA
- Low standby consumption: <0,3W
- Long Life MTBF: 1,1M hours
- Output by 2 flyleads with green LV1 connectors
- Supplied with Europlug CEE 7-16 mains lead, 1,5m long
- 1 DIN position wide (18mm)
- LED power-on indicator

Standards compliance:
- UL, CSA, CE, TüV approved
- EN61558-2-16, IEC62368-1
- EN55032 class B,
- EN61000-3-2,3; EN61000-4-2,3,4,5,6,8,11;
- EN61204-3

Dimensions:WxHxD (mm):18x90x54,5
Net weight (kg/unit) :    0,21kg
Gross weight (kg/unit):  0,25kg
Packaging:  Individually packaged]]> Mon, 06 Jul 2020 10:50:26 +0000 Input coax port:
The amplifi er’s input accepts broadband FM and TV signals in the range between 88 and 1.006MHz. The port
also carries return path signals in the reverse direction in a band between 5MHz and 65MHz for use on Docsis
compliant CableTV networks.
Output coaxial port:
The amplified combination FM/VHF/UHF (extended to 1.006MHz) is offered on an F-coaxial connector.
The front panel also sports two -20dB F-type test connectors that replicates the amplifier’s input and output signals.
The amplifier is built inside a cast aluminium housing which provides exceptional thermal conduction, effectively cooling the electronics, and protection from Electromagnetic interference and Electrostatic Discharge.
The amplifi er has a built-in 230VAC mains power supply.

Characteristics:
- 1 F coax input: DS Aerial or CableTV and US return path
- 1 F coax input test port: DS Aerial or CableTV and US return path, -20dB
- 1 F coax ouput test port: DS Aerial or CableTV and US return path, -20dB
- 1 F coax output: 88-1006MHz downstream, 28-40dB gain, 0-16dB slope)
max output 106dBµV;  5-65MHz upstream return path, 13-29dB gain
- internal 230VAC mains power supply

Standards compliance:
• Safety: EN60065
• EMI: EN50081-1 & EN50082-1
• immunity test voltage contact discharge 4kV, air discharge 8kV
• RoHS compliance: 2002/95/EC
• WEEE compliance: 2002/96/EC]]> Mon, 06 Jul 2020 10:50:26 +0000