Link Length & Wiremap cabling tester for RJ45, RJ11, COAX links (ABI-TT1008S00)

Inverted wires, loose wires or short-circuited wires represent 95% of all common network cabling faults. This test set will allow you to identify and remedy most of these failures. The test set also allows a quite accurate measurement of each link’s length.
The test set consists of a main tester equipped with an LCD diagnostic display and a remote identifier.
The main tester provides a test signal which is put in sequence on all the pins of the RJ45 or Coax jack and the proper correspondence with the pins of the remote identifier is verified.
On the display one can see if the wires are properly connected, inverted, open circuit or short circuited. The length of each wire pair can be read from the display.
The different characteristics of different makes of cables can be taken into account by a calibration function: starting from a reference length of cable with known length, up to four different calibrations can be stored in memory and recalled when testing the specific brand or type of cable.

The test set is compatible with UTP, FTP, STP, F²FTP, telephone pairs and coaxial links
The master unit is powered by a 9V alkaline battery.
The test set comes in a handy carrying pouch.

Characteristics:
Functionality:
RJ45: wiremap local & remote, link length
RJ11: wiremap local
Coax: wiremaplocal & remote, link length
Cable length (max): 1-1000m
4 calibration memories
Unit: meter, foot, yard
Backlight display
Auto on/off timer
Testleads: RJ45-RJ45, RJ11-RJ11, RJ11-crocodiles
Master unit, remote unit
Carrying pouch with strap
9V batteriy not included

Weight (kg/unit):  0,40kg